Modelling the Stationary Vibrations and Dissipative Heating of Thin-Walled Inelastic Elements with Piezoactive Layers

A coupled dynamic problem of thermoelectromechanics for thin-walled multilayer elements is formulated based on a geometrically nonlinear theory and the Kirchhoff–Love hypotheses. In the case of harmonic loading, an approximate formulation is given using the concept of complex moduli to characterize the cyclic properties of the material. The model problem on forced vibrations of sandwich beam, whose core layer is made of a passive physically nonlinear material, and face layers, of a viscoelastic piezoactive material, is considered as an example to demonstrate the possibility of damping the vibrations by applying harmonic voltage to the oppositely polarized layers of the beam. Substantiation is given for a linear control law with a complex coefficient for the electric potential, which provides damping of vibrations in the first symmetric mode at the linear and nonlinear stages of deformation. The stress–strain state and dissipative-heating temperature are studied     

功能梯度压电板条中电绝缘型运动裂纹的电弹性场

基于三维弹性理论和压电理论，对材料系数按指数函数规律分布的功能梯度压电板条中的反平面运动裂纹问题进行了求解。利用Fourier积分变换方法将电绝缘型运动裂纹问题化为对偶积分方程，并进一步归结为易于求解的第二类Fredholm积分方程。通过渐近分析，获得了裂纹尖端应力、应变、电位移和电场的解析解，给出了裂纹尖端场各个变量的角分布函数，并求得了裂纹尖端场的强度因子，分析了压电材料物性梯度参数、几何尺寸及裂纹运动速度对它们的影响。结果表明，对于电绝缘型裂纹，功能梯度压电板条中运动裂纹尖端附近的各个场变量都具有-1／2阶的奇异性；当裂纹运动速度增大时，裂纹扩展的方向会偏离裂纹面。     

A shear stress transducer for molten polymers

Present rheometrical techniques are inadequate for the measurement of viscoelastic properties associated with shearing at high rates. A possible solution to this problem is to use a sliding plate rheometer together with a device for measuring the local wall shear stress away from the ends and edges of the plates. Such a device has been constructed, and the results of preliminary tests are encouraging.     

脉冲辐照下三维多向碳纤维编织复合材料热激波的实验研究

在“闪光二号”脉冲电子束加速器上,采用自行研制的保护环式石英压电传感器,对三维多向碳纤维编织复合材料的热激波传播特性开展了实验研究。结果表明: (1)在电子束能注量为382J/cm2 ~953J/cm2范围内,三维编织复合材料的热激波应力峰值在 97~406MPa之间,只是相同能注量下Ly-12铝的 8%左右,这表明该材料具有良好的衰减热激波的性能; (2)三维编织复合材料中的热激波,其波速较低(大约为 2. 78~3. 45km/s),只是Ly-12铝的 0. 4倍左右,其波形上升时间也比Ly-12铝的大; (3)热激波强度和能注量间近似有线性关系,但烧蚀质量却随能注量增加而增加,当能注量足够高时,质量亏损面密度几乎以指数方式增加。     

Lamb波理论及层合板冲击损伤的实验研究

从理论上分析了板中Lamb波信号的传播特性,并给出Lamb波在板中传播的频散方程。理论分析及实验均表明,Lamb波的频散特性与复合材料结构损伤有着直接的联系,而且最低阶的对称和反对称Lamb波模态对层合板的损伤比较敏感,但应用Lamb波的频散效应监测结构的损伤在检测技术上还难以实现。根据板中导波形成Lamb波的共振原理,板中应力波的幅频特性很大程度上反映了Lamb波的谐振特征。因此,利用压电元件的压电阻抗谱分析应力波的各阶模态频率及振幅对结构损伤的变化,能够反映材料内部损伤与Lamb波的频散特性。文中针对表面粘贴压电元件的层合板智能结构,建立了包含Lamb波谐振模式的压电阻抗计算模型。冲击损伤试件的实验表明,由于结构损伤的出现压电阻抗谱中的模态频率及其阻抗幅值等特征信息将发生变化。因此,引入应力波损伤因子可以对结构冲击损伤的存在和程度进行初步评价。该方法基于结构的机-电动态阻抗特性,不受结构的几何形状限制,测试用的压电元件成本低,方法简单可行,有望在智能结构的健康诊断方面获得应用。     

POLYNOMIAL SOLUTIONS TO PIEZOELECTRIC BEAMS(Ⅱ)--ANALYTICAL SOLUTIONS TO TYPICAL PROBLEMS

For the orthotropic piezoelectric plane problem, a series of piezoelectric beams is solved and the corresponding analytical solutions are obtained with the trialand-error method on the basis of the general solution in the case of three distinct eigenvalues, in which all displacements, electrical potential, stresses and electrical displacements are expressed by three displacement functions in terms of harmonic polynomials. These problems are cantilever beam with cross force and point charge at free end, cantilever beam and simply-supported beam subjected to uniform loads on the upper and lower surfaces, and cantilever beam subjected to linear electrical potential.     

压电陶瓷片在振动试验中的应用

通过压电陶瓷片在平板上进行激振和拾振试验,实测压电陶瓷片的某些性能及其对试件固有频率和振型的影响,获取压电陶瓷片的有关数据,以便对实际机械构件作分离纯模态时选配合理的激励方案。     

压电层合圆板传感器的非线性静力耦合分析

本文基于von Karman薄板非线性理论，压电基本方程和经典层合板理论，对上，下表面粘有压电传感膜层的圆薄板压力传感器的力-电耦合特性进行了定理分析。首先，针对压电层合圆板传感器件建立了考虑几何非线性变形的力-意耦合模型。给出了压电薄膜层感应电量的计算公式；然后，采用级数解法进行了求解，得到了非线性静力耦合问题的幂级数精确解，给出了传感器静态测量过程中所关心的压力-电量特征曲线和中心挠度，电量特征曲线；同时，定量讨论了压电二次效应对感应电量和层合结构中心挠度的影响。通过所得结果，在压电式压力传感器设计中，为采用电信号直接输出有关结构的变形和外界载荷等待测参量提供了依据。     

A piezoelectric stress gauge for measuring dynamic stress in soil and rock media

A piezoelectric stress gauge is described in this paper. Its major performance data are: measuring range 10⁶–10⁸ Pa, response time less than 7μs; non-linearity within ±1% and total stress measurement error within ± 10%. It can be used for measuring dynamic stress in soil, rock and concrete media as well as dynamic force and dynamic pressure in fluids.     

层合结构压电器件的机电耦合效应

压电传感器和致动器都可以看成是一种复合材料层合板结构，由压电材料层和非压电(弹性)材料层交替铺设而成。对于这类任意铺设的层合板悬臂梁结构，我们推导出了表示力学变形与外加电场之间耦合效应的解析表达式。进而，又推导出了两类(一类为单层压电-弹性层，另一类为双层压电-弹性层)层合型悬臂梁结构机电耦合性能的解析公式。在该机电耦合模型中，包括了两个压电常数d211和d222。此外，还建立了含压电材料的有限元算式，进行了实验测量。最后，通过比较解析解(包括考虑了d222参数的理论值和没有考虑d222参数的理论值)，实验值以及有限元计算结果，发现它们吻合得很好，而且考虑d222是十分必要的。